Untitled Document


 

 

 

        Firmware Updates

 

 

Note: All firmware updates are cumulative. You only need to download and apply the latest revision to benefit from all the fixes and/or enhancements of previous versions.
 
DTR-7.3
DTR-7.3 Firmware Version 01.00.18
 
How to use Updater:
1. Create a folder to store the downloaded setup file.
2. Download the setup file into this folder.
3. Double click the self-extracting setup file.
4. Refer to the documentation included in the ZIP file for directions.
5. Follow the on-screen instructions to complete the installation.
 
Disclaimer:
Integra does not warrant the files (including any fixes and updates) provided in the download section of the Integra web sites (the "Sites"). All files available for download (the "Files") from the Sites are provided "as is." In connection with the Files, Integra makes no warranties of any kind, either expressed or implied, including but not limited to, warranties of merchantability, fitness for a particular purpose, or of non-infringement of third party rights. Use of the Files by a user is at the user’s own risk. In no event shall Integra be liable to the user for any damages, whatsoever, arising from use of or inability to use the Files, including but not limited to, any lost profits, lost savings, loss of any equipment, media or data, or other special, incidental or consequential damages, even if Integra has been advised of the possibility of such damages, or for any claim by another party.
The updates provided for download on Integra web sites are the latest ones that have been validated by Integra. PLEASE NOTE THAT USER’S FAILURE TO PROPERLY FOLLOW ALL DOWNLOAD INSTRUCTIONS MAY CAUSE DAMAGE TO YOUR PRODUCT. ANY DAMAGE TO PRODUCTS THROUGH USER ERROR DURING UPGRADE PROCEDURES IS NOT COVERED UNDER THE WARRANTY TERMS AND CONDITIONS FOR THESE PRODUCTS.
COPYRIGHT Each one of the Files (as defined in the "Disclaimer" subsection above) is the copyrighted work of Integra. Use of the Files is subject to copyright laws of Japan. Use of any of the Files in any manner that would violate the copyright laws of Japan is expressly forbidden.

I agree to the Disclaimer
 
 
 
DTR-8.3
DTR-8.3 Firmware Version 01.00.18
 
How to use Updater:
1. Create a folder to store the downloaded setup file.
2. Download the setup file into this folder.
3. Double click the self-extracting setup file.
4. Refer to the documentation included in the ZIP file for directions.
5. Follow the on-screen instructions to complete the installation.
 
Disclaimer:
Integra does not warrant the files (including any fixes and updates) provided in the download section of the Integra web sites (the "Sites"). All files available for download (the "Files") from the Sites are provided "as is." In connection with the Files, Integra makes no warranties of any kind, either expressed or implied, including but not limited to, warranties of merchantability, fitness for a particular purpose, or of non-infringement of third party rights. Use of the Files by a user is at the user’s own risk. In no event shall Integra be liable to the user for any damages, whatsoever, arising from use of or inability to use the Files, including but not limited to, any lost profits, lost savings, loss of any equipment, media or data, or other special, incidental or consequential damages, even if Integra has been advised of the possibility of such damages, or for any claim by another party.
The updates provided for download on Integra web sites are the latest ones that have been validated by Integra. PLEASE NOTE THAT USER’S FAILURE TO PROPERLY FOLLOW ALL DOWNLOAD INSTRUCTIONS MAY CAUSE DAMAGE TO YOUR PRODUCT. ANY DAMAGE TO PRODUCTS THROUGH USER ERROR DURING UPGRADE PROCEDURES IS NOT COVERED UNDER THE WARRANTY TERMS AND CONDITIONS FOR THESE PRODUCTS.
COPYRIGHT Each one of the Files (as defined in the "Disclaimer" subsection above) is the copyrighted work of Integra. Use of the Files is subject to copyright laws of Japan. Use of any of the Files in any manner that would violate the copyright laws of Japan is expressly forbidden.

I agree to the Disclaimer
 
 
 
DTR-7.4
DTR-7.4 Firmware Version 01.00.03
 
How to use Updater:
1. Create a folder to store the downloaded setup file.
2. Download the setup file into this folder.
3. Double click the self-extracting setup file.
4. Refer to the documentation included in the ZIP file for directions.
5. Follow the on-screen instructions to complete the installation.
 
Disclaimer:
Integra does not warrant the files (including any fixes and updates) provided in the download section of the Integra web sites (the "Sites"). All files available for download (the "Files") from the Sites are provided "as is." In connection with the Files, Integra makes no warranties of any kind, either expressed or implied, including but not limited to, warranties of merchantability, fitness for a particular purpose, or of non-infringement of third party rights. Use of the Files by a user is at the user’s own risk. In no event shall Integra be liable to the user for any damages, whatsoever, arising from use of or inability to use the Files, including but not limited to, any lost profits, lost savings, loss of any equipment, media or data, or other special, incidental or consequential damages, even if Integra has been advised of the possibility of such damages, or for any claim by another party.
The updates provided for download on Integra web sites are the latest ones that have been validated by Integra. PLEASE NOTE THAT USER’S FAILURE TO PROPERLY FOLLOW ALL DOWNLOAD INSTRUCTIONS MAY CAUSE DAMAGE TO YOUR PRODUCT. ANY DAMAGE TO PRODUCTS THROUGH USER ERROR DURING UPGRADE PROCEDURES IS NOT COVERED UNDER THE WARRANTY TERMS AND CONDITIONS FOR THESE PRODUCTS.
COPYRIGHT Each one of the Files (as defined in the "Disclaimer" subsection above) is the copyrighted work of Integra. Use of the Files is subject to copyright laws of Japan. Use of any of the Files in any manner that would violate the copyright laws of Japan is expressly forbidden.

I agree to the Disclaimer
 
 
 
DTR-8.4
DTR-8.4 Firmware Version 01.00.03
 
How to use Updater:
1. Create a folder to store the downloaded setup file.
2. Download the setup file into this folder.
3. Double click the self-extracting setup file.
4. Refer to the documentation included in the ZIP file for directions.
5. Follow the on-screen instructions to complete the installation.
 
Disclaimer:
Integra does not warrant the files (including any fixes and updates) provided in the download section of the Integra web sites (the "Sites"). All files available for download (the "Files") from the Sites are provided "as is." In connection with the Files, Integra makes no warranties of any kind, either expressed or implied, including but not limited to, warranties of merchantability, fitness for a particular purpose, or of non-infringement of third party rights. Use of the Files by a user is at the user’s own risk. In no event shall Integra be liable to the user for any damages, whatsoever, arising from use of or inability to use the Files, including but not limited to, any lost profits, lost savings, loss of any equipment, media or data, or other special, incidental or consequential damages, even if Integra has been advised of the possibility of such damages, or for any claim by another party.
The updates provided for download on Integra web sites are the latest ones that have been validated by Integra. PLEASE NOTE THAT USER’S FAILURE TO PROPERLY FOLLOW ALL DOWNLOAD INSTRUCTIONS MAY CAUSE DAMAGE TO YOUR PRODUCT. ANY DAMAGE TO PRODUCTS THROUGH USER ERROR DURING UPGRADE PROCEDURES IS NOT COVERED UNDER THE WARRANTY TERMS AND CONDITIONS FOR THESE PRODUCTS.
COPYRIGHT Each one of the Files (as defined in the "Disclaimer" subsection above) is the copyrighted work of Integra. Use of the Files is subject to copyright laws of Japan. Use of any of the Files in any manner that would violate the copyright laws of Japan is expressly forbidden.

I agree to the Disclaimer
 
 
 
DTC-9.4
DTC-9.4 Firmware Version 01.00.09
 
How to use Updater:
1. Create a folder to store the downloaded setup file.
2. Download the setup file into this folder.
3. Double click the self-extracting setup file.
4. Refer to the documentation included in the ZIP file for directions.
5. Follow the on-screen instructions to complete the installation.
 
Disclaimer:
Integra does not warrant the files (including any fixes and updates) provided in the download section of the Integra web sites (the "Sites"). All files available for download (the "Files") from the Sites are provided "as is." In connection with the Files, Integra makes no warranties of any kind, either expressed or implied, including but not limited to, warranties of merchantability, fitness for a particular purpose, or of non-infringement of third party rights. Use of the Files by a user is at the user’s own risk. In no event shall Integra be liable to the user for any damages, whatsoever, arising from use of or inability to use the Files, including but not limited to, any lost profits, lost savings, loss of any equipment, media or data, or other special, incidental or consequential damages, even if Integra has been advised of the possibility of such damages, or for any claim by another party.
The updates provided for download on Integra web sites are the latest ones that have been validated by Integra. PLEASE NOTE THAT USER’S FAILURE TO PROPERLY FOLLOW ALL DOWNLOAD INSTRUCTIONS MAY CAUSE DAMAGE TO YOUR PRODUCT. ANY DAMAGE TO PRODUCTS THROUGH USER ERROR DURING UPGRADE PROCEDURES IS NOT COVERED UNDER THE WARRANTY TERMS AND CONDITIONS FOR THESE PRODUCTS.
COPYRIGHT Each one of the Files (as defined in the "Disclaimer" subsection above) is the copyrighted work of Integra. Use of the Files is subject to copyright laws of Japan. Use of any of the Files in any manner that would violate the copyright laws of Japan is expressly forbidden.

I agree to the Disclaimer
 
 
 
NAC-2.3
NAC-2.3 Firmware Version 01.00.04
 
How to use Updater:
1. Create a folder to store the downloaded setup file.
2. Download the setup file into this folder.
3. Double click the self-extracting setup file.
4. Refer to the documentation included in the ZIP file for directions.
5. Follow the on-screen instructions to complete the installation.
 
Disclaimer:
Integra does not warrant the files (including any fixes and updates) provided in the download section of the Integra web sites (the "Sites"). All files available for download (the "Files") from the Sites are provided "as is." In connection with the Files, Integra makes no warranties of any kind, either expressed or implied, including but not limited to, warranties of merchantability, fitness for a particular purpose, or of non-infringement of third party rights. Use of the Files by a user is at the user’s own risk. In no event shall Integra be liable to the user for any damages, whatsoever, arising from use of or inability to use the Files, including but not limited to, any lost profits, lost savings, loss of any equipment, media or data, or other special, incidental or consequential damages, even if Integra has been advised of the possibility of such damages, or for any claim by another party.
The updates provided for download on Integra web sites are the latest ones that have been validated by Integra. PLEASE NOTE THAT USER’S FAILURE TO PROPERLY FOLLOW ALL DOWNLOAD INSTRUCTIONS MAY CAUSE DAMAGE TO YOUR PRODUCT. ANY DAMAGE TO PRODUCTS THROUGH USER ERROR DURING UPGRADE PROCEDURES IS NOT COVERED UNDER THE WARRANTY TERMS AND CONDITIONS FOR THESE PRODUCTS.
COPYRIGHT Each one of the Files (as defined in the "Disclaimer" subsection above) is the copyrighted work of Integra. Use of the Files is subject to copyright laws of Japan. Use of any of the Files in any manner that would violate the copyright laws of Japan is expressly forbidden.

I agree to the Disclaimer
 
 

 

 Home | Dealers | Support | Warranty | Site Map         251 1